en_US EN
en_US EN zh_CN ZH
Login / Registration

608ZZ 608RS Linear Bearing 3D Printer Replacement

SKU N/A Category
608ZZ 608RS Linear Bearing 3D Printer Replacement

Quantity

Unit Price

Price

Price range: $0.16 – $0.17

-
+

Price range: $0.16 – $0.17

Total:

Price range: $0.16 – $0.17

608ZZ 608RS Linear Bearing 3D Printer Replacement Description

  1. Performance
    • High-Grade Materials – Available in vacuum-degas bearing steel GCr15 (AISI 52100) hardened to HRC 60-64, or corrosion-resistant SUS440C martensitic stainless steel hardened to HRC 58-60. Both options offer radial dynamic load ratings ≈ 3 500 N and limit speeds beyond 40 000 rpm, easily exceeding the demands of filament-drive idlers and motion rollers.
    • Shielding Options – 608ZZ features twin metal shields for minimal drag and high rotational speed; 608RS adds nitrile rubber contact seals for superior dust and moisture protection with slightly higher torque.
    • Precision ABEC-5 Geometry – Run-out < 5 µm, radial clearance in class C3 for smooth, chatter-free motion and consistent extrusion flow.
    • Low-Noise, Low-Friction Raceways – Super-finished race tracks and Grade 10 chrome balls yield a friction coefficient < 0.0015, cutting vibration and motor workload during rapid infill moves.
  2. How to Use on a 3 D Printer
    • Filament Drive Idler – Replace the factory idler bearing by seating the 608ZZ/608RS onto the idler bolt or shoulder screw; ensure axial alignment to keep filament centered on the hobbed gear.
    • V-Wheel or Roller Carriage – Press the bearing into a molded or machined POM/ABS wheel, fit the wheel onto an eccentric axle, and adjust preload until the carriage glides smoothly on the rail without play.
    • Belt Tensioner Pulley – Mount a 608-series bearing inside a printed or aluminum pulley body; secure with an M5 bolt and spacer so that the belt tracks true and free of edge rub.
    • Maintenance Cycle – Clean with isopropyl alcohol every 300 printing hours; for 608RS, gently pry one seal, add a drop of light grease, reseat the seal, and spin to distribute lubricant.
  3. User-Friendly Operation
    • Drop-In Dimensions – Standard 8 mm ID × 22 mm OD × 7 mm width fits common printer pulleys, idlers, and wheels without spacers or shims.
    • Pre-Lubricated & Ready-to-Run – Factory-filled with lithium complex grease for immediate installation; no messy packing required.
    • Simple Tooling – Installs using only a hex key and open-end wrench; removal aided by a basic 3D-printed press tool or M8 bolt, eliminating the need for specialized pullers.
    • Interchangeable Shields & Seals – Identical outer geometry lets users swap ZZ and RS versions to balance speed versus contamination resistance without redesigning parts.
  4. Quality & Longevity
    • ISO 9001 / IATF 16949 Certified Production – 100 % noise, vibration, and torque inspection; laser-etched batch codes enable full traceability.
    • Endurance Proven – Laboratory tests show < 0.01 mm increase in radial play after 2 million revolutions at 200 N radial load; thermal cycling from −20 °C to +120 °C causes no seal degradation or grease bleed.
    • Corrosion & Contaminant Resistance – SUS440C variant withstands salt spray and humid enclosures; 608RS sealing keeps out fine PLA/ABS dust, extending service life threefold compared with open bearings.
    • Environmentally Compliant – Bearings are RoHS- and REACH-conformant, free from hexavalent chromium and heavy-metal additives, ensuring safe integration in consumer and educational printing environments.

Additional information

Bearing Type

608-2RS, 608-2Z
Cage & cage material

Steel
Inner Diameter(mm)

8
Outer Diameter(mm)

22
Width(mm)

7
Precision Grade

P6
Dynamic load rating Cr (KN)

1
Static Load Rating Cor(KN)

2
Max Speed Grease Lubrication(RPM)

3
Max Speed Oil Lubrication(RPM)

2, 3
Shipping Term

EXW Guangdong Province
Package Size(cm)

30*20*20
Manufacturer

GUXIANG
Weight

0.012
SKU

1，000,000 pieces

Product Related

Related products

Social Chat is free, download and try it now here!