DIN 6796 Углеродистая сталь Спринг Уошер

Артикул Н/Д Категория Шайбы

Количество

Цена за единицу

Цена

Ценовой диапазон: от $0.014 до $0.040

Итого:

Ценовой диапазон: от $0.014 до $0.040

DIN 6796 Углеродистая сталь Спринг Уошер Описание

High-Load, Self-Compensating Spring Performance
• Formed to DIN 6796 from quenched-and-tempered alloy or high-carbon spring steel (60Si2MnA / 51CrV4), each conical washer delivers a predictable load–deflection curve with spring-rate tolerances held to ±10 %.
• Typical hardness 42 – 48 HRC enables elastic energy densities up to three times greater than flat washers, maintaining bolt preload after joint settling, thermal expansion, or vibration.
• A ≥ 8 µm electro-zinc layer sealed with trivalent passivation protects against red rust for ≥ 120 h neutral salt-spray (ISO 9227); optional clear, yellow, black, olive or any RAL / Pantone top-coat pushes corrosion life past 1 000 h and supports visual size or circuit coding.
• Shot-peened surfaces introduce compressive residual stress, extending fatigue endurance beyond 2 × 10⁶ cycles at 75 % of maximum deflection—ideal for shock-loaded joints.
Широкий, межотраслевой спектр применения
• Power Generation & Turbomachinery: Maintains bolt tension on turbine casings, generator end shields and gearbox flanges despite vibration and temperature swings.
• Oil, Gas & Chemical Processing: Live-loads pump and valve gland followers, preventing leakage during pressure fluctuations and thermal cycling.
• Automotive, Rail & Off-Highway Vehicles: Compensates for settling in suspension brackets, brake callipers and driveline couplings exposed to road shock, impact and corrosive environments.
• Construction, Mining & Heavy Equipment: Absorbs impact loads in crusher housings, excavator boom pivots and hydraulic pump mounts where downtime is costly.
Установщик-дружественный, Space-Saving Handling
• Chamfered inner/outer edges prevent scoring when sliding over studs; orientation marks on the rim guide rapid stacking (series or parallel) without calipers.
• Direct substitution for plain washers—existing torque values remain valid while the spring action automatically compensates for gasket creep, paint thickness or thermal growth.
• Slim height-to-load ratio produces high clamp forces in confined spaces, often eliminating bulky Belleville stacks or hydraulic tensioners.
• Available loose, shrink-wrapped in columns, or tape-and-reel for automated feeders; optional PTFE-free dry-film lubricant reduces installation friction and galling on coated or stainless fasteners.
Сертифицированное качество и долговечность
• 100 % optical inspection verifies thickness ±0.02 mm, cone angle ±0.25°, parallelism ≤0.05 mm, and free height ±0.1 mm; statistical Cp/Cpk ≥ 1.33 data support ISO 9001, IATF 16949 and AS 9100 quality systems.
• Post-forming stress-relief temper removes residual stresses, preserving ductility for repeated service disassembly and re-torque cycles.
• Duplex-coated variants (zinc + epoxy powder) withstand 1 000 h xenon-arc weathering and 200 °C bake without flaking or colour shift, suitable for outdoor, offshore and mildly chemical environments.
• Each production lot is QR-coded for full traceability to melt chemistry, heat treatment, coating bath and load-deflection charts, giving engineers confidence in safety-critical applications across industries.

Дополнительная информация

Покрытие	Синий цинк, настраиваемый цвет, цветной цинк
Диаметр	1.6, 10, 12, 16, 18, 20, 22, 24, 27, 30, 32, 36, 45, 48, 50, 6, 8
Производитель	GUXIANG
Материал	Сплавная сталь, углеродистая сталь
Размер упаковки (см)	302020
Условия доставки	EXW провинция Гуандун
Артикул	1 000 000 штук