$0.006–$0.062Ценовой диапазон: от $0.006 до $0.062
Итого:
$0.006–$0.062Ценовой диапазон: от $0.006 до $0.062
DIN 7980 A4 Стиральная машина из нержавеющей стали для цилиндрических головных винтов Описание
Robust, Corrosion-Immune Spring-Action Locking
• Engineered to DIN 7980 dimensions for M6 cylindrical (socket) head screws, the washer is formed from A4 (316) austenitic stainless steel and work-hardened to ≈ 220 HV, delivering a high spring rate that maintains clamp force under vibration, thermal cycling, or joint relaxation.
• The compressed helical ring exerts a continuous axial load; sharpened coil ends bite into the underside of the screw head and mating surface, blocking rotation without damaging threads.
• Molybdenum-bearing alloy resists pitting, crevice corrosion, and chloride stress-corrosion cracking in saltwater, chemical-process fluids, industrial cleaners, and disinfectants from −200 °C to +550 °C.
• Meets or outperforms ISO 3506-2 mechanical property requirements and retains ≥ 90 % of initial preload after 1 000 cycles in Junker transverse-vibration testing.
Wide-Ranging Industrial & Commercial Applications
• Marine & Offshore Structures: Secures valve covers, deck-fitting brackets, and sensor enclosures exposed to brine spray and galvanic couples.
• Food, Beverage & Pharmaceutical Equipment: Locks guards, agitator housings, and conveyor modules that undergo caustic wash-downs or steam sterilisation.
• Chemical Processing & Water Treatment: Maintains torque on pump casings, instrumentation panels, and pipe-flange fasteners subjected to acids, alkalis, and fluctuating temperatures.
• Renewable-Energy, Robotics & HVAC: Prevents back-off on turbine electronics, servo-motor mounts, and vibration-prone fan assemblies where stainless integrity and compact height are critical.
Установщик-дружественный, экономящий время
• Designed specifically for socket-head cap screws—outer diameter nests perfectly under the head, avoiding overhang and keeping assemblies flush inside counterbores.
• Identical tightening torque to plain washers—no special charts or tools; installers simply follow the standard torque value for an M6 stainless fastener.
• Chamfered coil ends minimise burrs, enabling smooth feeding through magnetic sockets, vibratory bowls, or automated pick-and-place equipment.
• Supplied bulk-packed, in resealable pouches, or tape-and-reel strands for integration with field toolkits, bench stations, and high-speed assembly lines; optional laser-etched “M6 A4” code speeds sorting.
Сертифицированное качество и долговечность
• 100 % dimensional and hardness inspection verifies free height, gap width, concentricity ≤ 0.05 mm TIR, and spring force; statistical Cp/Cpk ≥ 1.33 data archived for ISO 9001, IATF 16949, and AS 9100 compliance.
• Stress-relief tempering eliminates residual forming stresses, ensuring elastic recovery through countless tighten/loosen cycles without loss of bite.
• Electropolished variants achieve surface roughness ≤ 0.4 µm for hygienic or decorative finishes while maintaining locking performance; low-outgassing versions meet clean-room and vacuum service standards.
• QR-coded carton labels trace every washer lot back to melt chemistry, passivation batch, and mechanical test report, guaranteeing full material transparency for safety-critical aerospace, medical, and infrastructure projects.
