$0.018 -$0.073मूल्य सीमा: $0.018 के माध्यम से $0.073
कुल:
$0.018 -$0.073मूल्य सीमा: $0.018 के माध्यम से $0.073
लो कैप-304 स्टेनलेस स्टील लो प्रोफाइल कैप नट-DIN917 लो प्रोफाइल ब्लाइंड नट के साथ लो प्रोफाइल हेक्स नट विवरण
Superior Mechanical & Corrosion Performance
• Precision-cold-headed from 18-8 (A2/304) stainless steel and machined to the ultra-shallow DIN 917 envelope, the nut delivers a tensile strength ≈ 700 MPa while limiting overall stack-height to just 3–6 mm depending on thread size.
• The fully closed, low-profile cap shields male threads from abrasion, splash water, and particulate ingress—yet is 35–50 % lighter than a standard DIN 1587 acorn nut, making it a favourite for weight-critical builds.
• Roll-formed ISO-metric Class 6H threads offer gall-free, repeatable torque even after dozens of disassembly cycles; the austenitic matrix resists chloride attack, mild acids, and temperatures to 400 °C without loss of strength.
ब्रॉड क्रॉस-इंडस्ट्री अनुप्रयोग स्पेक्ट्रम
• Industrial Automation & Robotics: Protects actuator-rod studs and sensor mounts inside tight machine enclosures where clearances are measured in millimetres.
• Sports & Mobility Equipment: Secures folding-bike hinges, skateboard trucks, and prosthetic joints—no snagging on clothing or skin.
• Electronics & Instrumentation: Provides a flush finish on rack panels, camera rigs, and laboratory fixtures, preventing conductive shorts or RF arcing from exposed threads.
• Architectural & Medical Devices: 304 stainless meets hygienic design rules for food, pharma, and clean-room hardware while offering a visually discreet aesthetic for handrails, display cases, or museum mounts.
फास्ट, ऑपरेटर-फ्रेंडली हैंडलिंग
• Standard hex drive works with any open-end or socket wrench; the reduced cap height means fewer turns to full clamp, cutting assembly time by up to 30 % versus full-height dome nuts cited by application guides.
• Light interference fit on the first ½ thread lets installers start by hand—even upside-down—minimising cross-threading risk during field service.
• Available in bulk cartons, mini-packs, or tape-and-reel formats, allowing seamless feeding to manual stations or automated pick-and-place systems.
Premium Quality & Compliance Assurance
• Each production lot is 100 % vision-inspected for cap concentricity ≤ 0.03 mm TIR, thread go/no-go, and burr height < 0.05 mm, backed by SPC charts ready for PPAP or AS9102 submissions.
• Parts are passivated per ASTM A967 and optionally electropolished for a microscopically smooth, chrome-like sheen that exceeds 1,000-h neutral salt-spray. Custom colour PVD or powder topcoats (RAL/Pantone) are available for branding or zone coding without compromising profile height.
• Supplied with RoHS 3, REACH, and DFARS certificates plus QR-coded box labels linking to melt-lot traceability—meeting stringent QA requirements across aerospace tooling, medical-device manufacture, and semiconductor-fab equipment.
