Precision-Formed, Versatile Spacer Performance
• Stamped from cold-rolled carbon or alloy steel and subsequently case-hardened to ≥ HV 280, the half-moon washer delivers stable axial spacing while its flat edge locks against panel walls, preventing rotation and ensuring repeatable alignment.
• A ≥ 8 µm electro-zinc layer with trivalent passivation shields the metal from red rust for at least 120 h neutral-salt-spray; duplex finishes (zinc + polyester powder) survive 1 000 h and can be supplied in clear, black, white, or any RAL/Pantone colour to blend with visible furniture surfaces.
• Thin-wall profile (typically 1.5 mm) saves weight and cavity depth yet supports compression loads above 5 kN without plastic deformation, keeping joint gaps consistent over years of use.
• Burr-free edges and a planar seating face (Ra ≤ 1.6 µm) protect veneered, melamine, or painted panels from scarring during tightening.
广泛、跨行业的应用范围
• Furniture & Cabinetry: Acts as a fixed spacer between cam-lock fittings, confirmat screws, knock-down bolts, and wooden dowels in wardrobes, flat-pack desks, and modular kitchens.
• Interior Fit-Out & Shopfitting: Levels glass or acrylic shelves, signage panels, and lighting tracks on aluminium frames where space for full circular washers is limited.
• DIY, Hobby & Maker Projects: Provides compact standoff in plywood CNC assemblies, 3-D-printed enclosures, and robotics chassis, preventing component tilt.
• Light Industrial & Electronics: Maintains clearance on control-panel doors, sensor brackets, and cable-tray covers exposed to vibration and periodic removal.
便于安装人员操作，节省时间
• Open-side (“half-moon”) geometry lets the washer slide onto pre-installed screws or studs without removing the fastener—ideal for tight corners or post-assembly adjustments.
• Flat edge serves as a visual and tactile locator, simplifying alignment by hand or automated pick-and-place equipment; no special jigs, drivers, or adhesives required.
• Generous inner diameter tolerates plated, painted, or slightly bent screws, eliminating on-site reaming and reducing assembly cycle times.
• Colour-coded coatings and optional laser-etched size codes enable rapid sorting, kitting, and quality checks on busy production lines.
经过认证的品质与长久耐用性
• 100 % optical inspection confirms outer-edge flatness ≤ 0.05 mm, concentricity ≤ 0.05 mm, and thickness ± 0.03 mm; statistical Cp/Cpk ≥ 1.67 records are archived under ISO 9001 and IATF 16949 systems.
• Shot-peen stress-relief boosts fatigue endurance, ensuring spacer integrity through 50 000 open/close cycles in cabinet hinges or vibration exposures up to 2 × 10⁶ pulses at 60 % proof load.
• Environmental testing—500 h cyclic humidity, 100 freeze-thaw cycles, and 1 000 h UV exposure—shows zero coating delamination and ≥ 95 % load retention, validating use in coastal, desert, or air-conditioned interiors alike.
• Lot-level QR codes link each part to melt chemistry, heat-treat curve, coating batch, and dimensional log, giving designers and quality engineers full traceability when specifying spacers for safety- or appearance-critical assemblies across industries.
