性能与材料特性
• Premium 304 Stainless Steel: Machined from AISI 304 (18-8) stainless steel, offering excellent corrosion resistance in salt-spray, humid, and chemical environments.
• Mechanical Strength: Tensile strength ≈515 MPa, yield strength ≈205 MPa, hardness ~80 HRB—sufficient to maintain firm clamping under static and light dynamic loads.
• Flat-End Tip Design: Precisely milled flat end distributes pressure evenly across mating surfaces, minimizing damage to shafts or hubs while maintaining consistent holding force.
• Passivated Finish: Chemically passivated to remove free iron and enhance the natural chromium oxide layer, further improving rust-resistance without adding plating that can crack or peel.
详细应用范围
• Shaft & Collar Locking: Secure collars, gears, pulleys, and couplings on motor and gearbox shafts where a flush, damage-minimizing contact is required.
• Precision Instruments & Electronics: Fasten circuit-board standoffs, optical mounts, and sensor assemblies in instrumentation and control panels.
• Food, Beverage & Marine Equipment: Withstands repeated wash-down and corrosive environments in food processing lines, marine hardware, and outdoor assemblies.
• Medical & Laboratory Devices: Non-magnetic and biocompatible for fixtures, clamps, and adjustment points in medical instruments and lab apparatus.
安装与调整轻松简单
• Slotted Drive: Simple flat-blade screwdriver interface accommodates a wide range of tool sizes, allowing rapid installation and field adjustments without specialized wrenches.
• Headless, Low-Profile Design: Completely recessed in the threaded hole, eliminating protrusions and reducing the risk of snagging or interference with adjacent components.
• Self-Seating Flat End: Cuts a micro-imprint in mating surfaces to resist loosening under vibration, yet can be easily repositioned or removed with minimal surface damage.
卓越品质与长期可靠性
• DIN 551 Standard Compliance: Manufactured to DIN 551 tolerances (±0.1 mm on thread diameter, ±0.2 mm on length), ensuring interchangeability across global suppliers.
• ISO 9001-Certified Production: Each batch undergoes dimensional inspection, drive-slot fit testing, and ≥240 h salt-spray corrosion testing per ASTM B117 for consistent performance.
• Full Material Traceability & RoHS Compliance: Lot-by-lot documentation from melt to finished part, free of restricted substances and magnetic anomalies—guaranteeing dependable operation in critical applications.
